The Rubber stem bow is used to seal the seam and also as a shock absorber. It is suitable for all Aerius models (bow only).  Colour: GreyMaterial: RubberDelivery: 1x Rubber stem bow in grey - all types (without glue)

The rubber stem is attached to the stern of the kayak to seal the seams and also to provide impact protection. The stern fitting is attached to the rubber stay at the rear and this is necessary to attach the rudder blade.  Colour: BlackMaterial: RubberDelivery: 1x Rubber stem stern - Aerius 380, 450 and 490 (without glue)

The rubber stem is attached to the stern of the kayak to seal the seams and also to provide impact protection. The stern fitting is attached to the rubber stay at the rear and this is necessary to attach the rudder blade.  Colour: BlackMaterial: RubberDelivery: 1x Rubber stem stern - Aerius 520, 545 and 585 (without glue)

The rubber stem is used to seal the seam and also as a shock absorber. The stern fitting is also attached to the rear rubber cam. This is necessary to attach the rudder blade. Colour: GreyMaterial: RubberDelivery: 1x Rubber stem stern in grey - Aerius 380, 450 and 490 (without glue)

The rubber stem is used to seal the seam and also as a shock absorber. The stern fitting is also attached to the rear rubber cam. This is necessary to attach the rudder blade.  Colour: GreyMaterial: RubberDelivery: 1x Rubber stem stern in grey - Aerius 520, 545 and 585 (without glue)

Black rudder blade for "Comfort" rudder set with fixed rudder head. This long rudder blade can be completely pulled up out of the water with your rope. It fits exactly into the pre-mounted stern fitting of every Klepper folding kayak.Delivery: 1x long rudder blade incl. rudder pin and leash for lifting the rudder

Complete control system with long deck-on-top control blade with fixed mounted control head, control pin, lifting line as well as control cables and foot control on claw. The steering pedal on claw is fixed to the bottom of the keel with two plank claws on the right and left side. This system is optimal for river cruising. Suitable for the models Aerius 520, 545, 585.Delivery: 1 x Long steering blade, 1 x steering pin, 1 x lifting line, 1 x steering ropes, steering pedal on claw.

Complete steering system with long deck-on-top steering blade with fixed mounted steering head, steering pin, leash fot lifting the rudder blade, ropefor rudder as well as fott control on clamp. The foot control on clamp is attached to the bottom of the keel with two footrest clamps on the right and left side. Suitable for the model Aerius 380 and 450. Delivery: long deck-on-top control blade, foot control, rope for rudder and leash for lifting the rudder blade

Complete rudder set with long deck-on-top steering blade with fixed steering head, steering pin, leash for lifting rudder blade, rope for rudder as well as foot control on rail. The control pedal and the seat are fixed in the already mounted rail by means of wing screw. Suitable for Aerius 490.Delivery: long deck-on-top control blade, foot control, rope for rudder and leash for lifting the rudder blade

Complete control system with long deck-on-top control blade with fixed mounted control head, control pin, suspension line as well as control cables and foot control on rail. The steering pedal as well as the seat is fixed in the already mounted rail by wing screw.Delivery: 1x long deck-on-top control blade, 1x control pedal, 1x control ropes, 1x hoisting line.

The rudder yoke is a component of the Standard steering system. It is necessary to hook the steering cables onto the rudder blade and is connected to the rudder blade by the steering pin.Colour: BlackMaterial: Metal Delivery: 1x rudder yoke - black

The Sail S-1 is the smaller version of our full sail configuration.It can also be used up to a wind force scale of 3-4 depending on the sea state. Wave height must always be considered. For beginners, we recommend starting with a smaller sail and use in lighter wind to get a better feel for its operation. Mainsail and Headsail Mast and Shrouds Boom made of seawater resistant anodized aluminum tubes Leeboard crossbar with two leeboards Main sheet and jib sheet Haylard Sail surface: around 2,5 m² Weight: around 5 kg Pack size: around 110cm No sailing license is required