Packing bag set, 2-piece, suitable for Klepper Marlin. Made of pure, rot-resistant and high-pressure impregnated cotton. Dimensions scaffold bag: 150cm x 55cm Dimensions boat skin bag: 90cm x 75cm Scope of supply: 1x boat frame bag, 1x boat skin bag Color: Black
Black 3-piece packing bag set, for all Aerius models from Klepper. Specially adapted to the packing characteristics of KLEPPER folding boats, 3-piece packing bag set made of pure, rot-resistant and high-pressure impregnated cotton with integrated webbing straps and carrying devices. In addition to the boat skin rucksack and frame bag, this set also includes a bulkhead bag.Dimensions:Frame Bag: 150 x 50 x 20 cm (h x b x t)Skin Packbag: 75 x 70 cm ( h x b )Frame Bag: 40 x 80 x 22 cm ( h x b x t ) Scope of delivery: 1x Packing bags Set 3 pcs
The paddle lock is recommended because a connection from the paddle with the boat is possible and thus these can not be lost. Scope of delivery: 1x Paddle lock - black
The perfect touring paddle for experienced paddlers. At 2.60 meter in length and weighing only 1120 grams, it is tailor-made for extensive tours and expeditions. The separable shaft, crafted from fiberglass, and the lightweight cedar wood blade make for an exceptional combination.Additionally, we offer the paddle in 2.50 meter length (1099060). Its elegant design makes it a perfect fit for our Kayaks.The paddle can be conveniently packed into the frame bag, eliminating the need for an extra packing bag. Delivery: 1x paddle "Loisach Extended" - 260cm incl. drip rings (without Klepper logo).
A penneant with a Bavaria motiv to attach to teh flag pole. Scope of supply: 1x pennant for flagstick - Bavaria
A pennant with a Germany motiv to attach to the flagpole. Scope of supply: 1x pennant for flagstick - Germany
A pennant with a Klepper motiv to attach to the flagpole.Scope of supply: 1x pennant for flagsick - KLEPPER
The quick repair suitable for folding boat skins and air sponsons. The condition is that the hole is not larger than 90mm.The advantage of this mechanical patch is that two sealing lips fix and seal the material.How to get the hole tight again?Quite simple:1.examine the damaged area as far as possible and determine the shape and size of the crack. If the hole is smaller than 50mm, it must be widened to this size, otherwise one side of the clamp will not fit into the crack.2. Unscrew the clamp (red screw) and insert the side opposite the screw into the hole.3. pull the inner part on the cord tightly to the inside of the repair area. The longitudinal axis of the hole should coincide with the longitudinal axis of the clamp. 4.The thread now peeking out of the damaged area has two detents that must match the visible recesses of the outer part. Pull the cord and slide the outer part onto the thread and screw it in place. When the gray thread becomes visible on the red screw, the assembly is correct. 5. before you finally tighten the screw, you can correct the position of the clamp closure again. 6.finished! The hole is now secured with a temporary patch that can be used without time limit until the final repair is made.
KLEPPER repair kit for lower ship made of TPU in black. Contents of delivery:1 repair piece for keel strip1 repair piece for the lower ship in black1 repair piece for the top in red1 air hose stopper1 repair piece air sponson1 roll fabric tape in black1 piece Sand paperPlease note: Adhesives are not included.
The robe for rudder are the connection from the control cross section to the control pedal. The control rope are hooked into the transverse control section by means of carabiners and laid forward through the boomerang to the control pedal. At the control pedal, the control cables are hooked into the metal pedal hooks on the right and left side of the foot pedals. The control cables end in a sufficiently long knotted chain through which the length can be individually adjusted. Abrasion-resistant 1:1 braiding made of high-strength branded polyester, 16-plait, diameter 2 mm, 240 daN. Delivery: 1 x pair ropes of rudder - Aerius 380, 520, 545, 585
The robe for rudder are the connection from the control cross section to the control pedal. The control rope are hooked into the transverse control section by means of carabiners and laid forward through the boomerang to the control pedal. At the control pedal, the control cables are hooked into the metal pedal hooks on the right and left side of the foot pedals. The control cables end in a sufficiently long knotted chain through which the length can be individually adjusted. Abrasion-resistant 1:1 braiding made of high-strength branded polyester, 16-plait, diameter 2 mm, 240 daN. Delivery: 1 x pair ropes of rudder - Aerius 490
The bow rubber stem is used to seal the seam and also as a shock absorber. It is suitable for all Aerius models (bow only). Colour: BlackMaterial: RubberDelivery: 1x Rubber stem bow in black - all types ( whitout glue)