Ground protection to protect the interior of the kajak, black. The ground protection is spread out in the boat hull before the frame halves are inserted and connected. When dismantling, the ground protection blanket can be simply removed from the hull at the end and with it all the things that accumulate during a trip. It protects the interior of the kajak from dirt and scratches!Suitable for Aerius 585 modelsDimensions: ca. 126 x 51 cmScope of delivery: 1x ground protection blanket - 585

Replacement carrying toggles for the kayak hull for comfortable carrying of the kayak.. Carrying toggle made of lacquered wood with corresponding line for knotting in the front or back of the kayak. Colour: black Delivery: 1x wooden carrying toggle

Replacement carrying toggles for the kayak hull for comfortable carrying of the kayak.. Carrying toggle made of lacquered wood with corresponding line for knotting in the front or back of the kayak. Colour: nature Delivery: 1x wooden carrying toggle

The comfort seat consists of a foamed seat and backrest. The backrest of the comfort seat can be adjusted upwards or downwards by a total of 6 cm within 4 steps. You can use our booster seats to achieve an optimal height for paddling. They are available in 3 cm, 6 cm and 9 cm height. To ensure the stability of the coaming the seat is supplied with a support tube, for this it is important that you specify the desired seating position.The sliding seat "Comfort" is suitable for all Aerius models.Dimensions: Height with backrest approx. 31 cm, max. width approx. 38 cm, max. depth approx. 38 cm.Weight: 2.0 to 2.5 kg.Delivery: 1x Sliding seat "Comfort" - foamed seat and backrest 

Compass holder for the single driver position for two-seaters (pos. center). Fits the following Aerius models 520, 545, 585. The board is made of eightfold glued high-quality birch plywood and mountain ash (dip-painted) for fastening to the coaming. Delivery: 1x compass holder incl. matching hook screws.

Compass holder at the front for seat position 1 (front). The ball compass is mounted on the bracket. Suitable for Aerius models: 490, 520 and 545. The board is made of eightfold glued high-quality birch plywood and mountain ash (dip painted).It is attached to the coaming with the hook screws.  Delivery: 1x compass holder incl. matching hook screws.

The utensil bag made of high-quality cotton.Scope of delivery: 1x utensil bag made of cotton 

THe double-stroke air pump pumps or extracts the air with each stroke, saving time and energy. The air pump is suitable for the air tubes in all Aerius models. It can also be used for  floating animals, air mattresses or inflatable boats at the lake. Size: 44,5 x 19 x 22 cm Weight: 800 g Volume: 2 x 2 litres Scope of delivery:  1x double-stroke air pump incl. transport bag (100% polyester) and adapters for double-seal valves, Boston valves and pinch valves. 

The Freewind sail is an easy to set up and use driving sail that offers support while paddling (only suitable for aft wind/ from behind). The assembly takes at most 10 minutes. Once lashed to the boat, the sail can be retrieved sideways or set up again within seconds. Material: high quality, super light spinnaker clothSize: approx. 1.4 m² Weight: approx. 2,2 kgA sailing license is not required!Delivery: 1x sailcloth, 2x trees, two-piece mast and packing bag. *Images may differ from the original color

The ergonomic backrest cover is made of water-repellent fabric. It is a cover for the ergonomic backrest with fastening eyelets for the sliding seat. Colour: BlackDelivery: 1x ergo backrest cover, black

By changing the seat position from the last seat to the single driver's seat further forward, a control cable extension is required.Delivery: 1x control cable extension for single driver's seat

Meet the fish! Klepper offers this fishing package as Fishing Set I for all Aerius models, suitable for single-seaters usable but also on multi-seaters (on multi-seaters only at the very front of the coaming head). This very easy to attach base plate is equipped with two universal holders. Additionally you can mount a GPS, compass, Navi Light or a "fishfinder" on the mounting board. The Fishing-Set I consists of: 1 mounting board (short), 2 hook bolts and 2 universal brackets and 2 fishing brackets.The mounting board for the single seaters with a width of 45 cm is mounted so far forward that it does not hinder you when paddling. The 60 cm wide mounting board for the multi seater ( see Fishing - Set II) you can mount in the front, in the middle or in the back. For this purpose, it already has several holes in different widths in the multi-seater model ex works. A note about adjusting the fishing rod holder: Inserting the fishing rod holder into the universal adapter receptacle on the mounting board only works in one position. Why? Because about 1cm before the rod holder is fully (and firmly) inserted, it can be rotated in all directions. To prevent the rod holder and rod from going overboard, there is only one position for complete insertion or removal.Delivery: 1 mounting board (short), 2 hook bolts and 2 universal brackets and 2 fishing brackets